Mediblink Ultrasonic Nebulizer M480

The Mediblink M480 nebulizer is suitable for the entire family, since it includes the mask for babies or children and the adult mask, mouthpiece, nosepiece, 10 saline solution or medicine cups, retractable hose which can be stretched up to 1 m in length, and 5 filters.

If desired, buttons, located on the top of nebulizer, can be pressed to regulate the speed of aerosol dispersion: MAX (0,90 ml/min), MED (0,8 ml/min), MIN (0,64 ml/min), and therefore adjust the therapy time to your needs.

Medicaly very effective: 45,92% more nebulized particles will reach the lower airways

The share of dispersed particles or aerosols, which are smaller then 5 microns (μm) and which, due to their size, reach lower airways (*PORR). The smaller the dispersed aerosols, the greater the efficacy of therapy, since a larger share of particles reaches the lower airways, all the way to the pulmonary alveolus. Thanks to special ultrasonic technology, the Mediblink M480 nebulizer disperses aerosols, only 1,39 μm (MMAD) in size, therefore as much as 95,92% (PORR) of aerosols reaches the lower airways. The therapy is therefore much more effective than if a regular nebulizer was used. The chart shows the time of the individual therapy, while using 5 ml of sterile saline solution. Thanks to special ultrasonic technology, the Mediblink M480 nebulizer enables 6 times shorter therapy time in comparison with traditional nebulizer.

Because of ultrasonic technology, the Mediblink ultrasonic nebulizer M480 is almost silent (32,9 dB).

Warranty: 3 Years

--------------------------------------------------------------------------------------------------------------

MAINTENANCE (STERILIZATION) OF SPARE PARTS:

The medicine container, oral and nasal attachment can be sterilized by dipping the parts in boiling water for a few minutes, then taking them out and letting them dry on their own. They can also be cleaned with an alcohol-based spray or using alcohol wipes.

The 2in1 mask and ribbed tube can be cleaned using a mixture of water (1 l) and baking soda (3 tablespoons). The part is then rinsed and allowed to dry. Since the hose is ribbed, we recommend that you dry it by hanging it so that the water drains well.

--------------------------------------------------------------------------------------------------------------